 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Important Note: The listings for the 2017-P Lincoln cent obverse doubled dies have changed drastically thanks to some serious heads up work by die variety collector Tanner Scott. We both suspected that at least one doubled working hub was responsible for the numerous look alike varieties. Tanner was able to identify two different doubled working hubs for the 2017-P Lincoln cent obverse doubled dies. The following trace back to WWHO-001: WDDO-004, WDDO-006, WDDO-007, WDDO-008, WDDO-010,WDDO-013, WDDO-014, and WDDO-015. The following trace back to WWHO-002: WDDO-011, WDDO-012, and WDDO-016.
2017-P 1¢ WWHO-001 Doubled Working Hub Description: Moderate extra thickness shows on the letters of LIBERTY with the upper left of the Y considerably thicker than the upper right. Die Markers: Obverse: Will vary among the different working dies that were affected. Reverse: Will vary among the different working dies that were affected. Submitted By: Various individuals Cross References: None known Comments: The following previously listed varieties have all been determined to be from WWHO-001: WDDO-004, WDDO-006, WDDO-007, WDDO-008, WDDO-010, WDDO-013, WDDO-014, and WDDO-015.
2017-P 1¢ WWHO-002 Doubled Working Hub Description: Moderate extra thickness shows on the letters of LIBERTY with the upper left of the Y considerably thicker than the upper right. This aspect is stronger on WHO-002 than it is on WWHO-001. Die Markers: Obverse: Will vary among the different working dies that were affected. Reverse: Will vary among the different working dies that were affected. Submitted By: Various individuals Cross References: None known Comments: The following previously listed varieties have all been determined to be from WWHO-002: WDDO-011, WDDO-012, and WDDO-016.
2017-P 1¢ WDDO-001 Description: Moderate extra thickness shows on the letters of LIBERTY with the upper left of the Y considerably thicker than the upper right. Die Markers: Obverse Stage A: A small die gouge can be found near the rim to the right of the second T in TRUST. A small die gouge can be found in the field to the left of the back of the head. A very small die gouge can be found to the right of the one in the date. Obverse Stage B: Same as Stage A. Reverse Stage A: None significant. Reverse Stage B: A small die chip can be found on the top of the shield north of the E in EPU. Submitted By: Stage A: James Wright, Stage B: Leonard Matyjasik Cross References: None known
2017-P 1¢ WDDO-002 Description: Moderate extra thickness shows on the letters of LIBERTY with the upper left of the Y considerably thicker than the upper right. Die Markers: Obverse: Die pitting shows on the front of the vest to the left of the mint mark. A small die gouge touches the top left of the P mint mark. Reverse: None significant. Submitted By: Alfonso Lopez Cross References: None known
2017-P 1¢ WDDO-003 Description: Moderate extra thickness shows on the letters of LIBERTY with the upper left of the Y considerably thicker than the upper right. Die Markers: Obverse Stage A: None significant. Obverse Stage B: None significant. Reverse Stage A: A die chip can be found on the top left of the shield north of the first U in PLURIBUS. Reverse Stage B: A die chip can be found on the top left of the shield north of the R in PLURIBUS. A die crack runs SSE from the bottom of the T in CENT to a die chip at the bottom of the shield. Submitted By: James Wright Cross References: None known
2017-P 1¢ WDDO-004 Description: Moderate extra thickness shows on the letters of LIBERTY and on the date. Die Markers: Obverse: None significant. Reverse: None significant. Submitted By: Jason Caldwell Cross References: None known Comments: This is a replacement listing. The original WDDO-004 turned out to be from one of the doubled working hubs known for the obverse of this date and mint.
2017-P 1¢ WDDO-005 Description: Moderate extra thickness shows on the letters of LIBERTY with the upper left of the Y considerably thicker than the upper right. Extra thickness also shows on the date. Die Markers: Obverse: Light die scratches run SE from the underside of the back of the chin and from the front of the throat. Reverse: None significant. Submitted By: Christopher Rhodes Cross References: None known
2017-P 1¢ WDDO-006 Description: Moderate extra thickness shows on the letters of LIBERTY. Extra thickness also shows on the date and WE TRUST. Die Markers: Obverse: A small die gouge (dot) can be found below the left side of the B in LIBERTY. A small die gouge (dot) can be found just to the left of the top of the P mint mark. Reverse: A die chip can be found on the top left of the shield north of the first U in PLURIBUS. Submitted By: Stephen Young Cross References: None known Comments: This is a replacement listing. The original WDDO-006 turned out to be from the doubled working hub that we now have listed as WWHO-001.
2017-P 1¢ WDDO-007 Listing Needed 2017-P 1¢ WDDO-008 Description: Moderate extra thickness shows on the letters of LIBERTY with the upper left and upper right of the Y approximately the same thickness. Die Markers: Obverse: None significant. Reverse: None significant. Submitted By: David Curfman Cross References: None known
2017-P 1¢ WDDO-009 Description: Moderate extra thickness shows on the letters of LIBERTY with the upper left of the Y considerably thicker than the upper right. Notching shows on the bottom of the ERTY in LIBERTY. Die Markers: Obverse: A die gouge can be found to the right of the center of the one in the date. Reverse: None significant. Submitted By: James Wright Cross References: None known
2017-P 1¢ WDDO-010 Listing Needed 2017-P 1¢ WDDO-011 Listing Needed 2017-P 1¢ WDDO-012 Listing Needed 2017-P 1¢ WDDO-013 Listing Needed 2017-P 1¢ WDDO-014 Listing Needed 2017-P 1¢ WDDO-015 Listing Needed 2017-P 1¢ WDDO-016 Listing Needed 2017-P 1¢ WDDO-017 Description: Moderate extra thickness shows on the date with slight extra thickness on the letters of LIBERTY. Extra thickness also shows on IN GOD WE TRUST where it increases from left to right. Die Markers: Obverse: A small die gouge can be found to the left of the mint mark. Reverse: A small die chip can be found on the top left of the shield north of the E in EPU. Submitted By: Cliff Reuter Cross References: CONECA: 1-O-VI
Reverse Varieties 2017-P 1¢ WDDR-001 Description: Moderate extra thickness shows on the designer’s initials LB and the designer’s initials JFM. Die Markers: Obverse: None significant. Reverse: None significant. Submitted By: Cliff Reuter Cross References: None known
| ||
