2021 1¢ WWHO-001 Description: Doubling shows
as a very minor protrusion from the lower left of the ear.
Die Markers: Obverse: Will vary with the individual working dies. Reverse: Will
vary with the individual working dies.
Submitted By: Thomas J.
Thomas Cross
References: None
known
2021 1¢ WDDO-001 Description: Moderate extra
thickness shows on LIBERTY. The upper
right of the Y in LIBERTY is considerably thicker than the upper left of the Y. Notching shows on the lower left corners of
the ERTY in LIBERTY.
Die Markers: Obverse: None significant. Reverse: A die
crack runs through the top left of the shield north of the PLUR in PLURIBUS.
Submitted By: James Wilkins
Cross References: None known
2021 1¢ WDDO-002 Description: Moderate extra
thickness shows on LIBERTY and the date.
The upper left of the Y in LIBERTY is considerably thicker than the
upper right of the Y. Notching shows on the
lower left corners of the ERTY in LIBERTY.
Die Markers: Obverse: None significant. Reverse: A die
crack runs through the top left of the shield north of the PLUR in PLURIBUS.
Submitted By: James Wilkins
Cross References: None known
Comments: WDDO-002 has a
similar die crack on the upper left of the shield to WDDO-001. While the die cracks are similar, close
comparison should show them to be different working dies. The die crack for WDDO-001 runs WNW/ESE above
the L in PLURIBUS and then turns and runs WSW/ENE above the UR in
PLURIBUS. The die crack for WDDO-002
runs WSW/ENE above the PLU in PLURIBUS.
2021 1¢ WDDO-003 Description: Moderate extra
thickness shows on LIBERTY. The upper
right of the Y in LIBERTY is considerably thicker than the upper left of the Y. Notching shows on the lower left corners of
the ERTY in LIBERTY. Slight extra thickness shows on the date. Die Markers: Obverse Stage A: A possible pre-die chip depression or die
chip can be seen on the lower Y in LIBERTY. Obverse
Stage B: A small die chip can be
found on the lower Y in LIBERTY. Reverse Stage A: Three die chips can be found on the top
left of the shield north of the PLU in PLURIBUS. A small die gouge can be found below the R in
PLURIBUS. Reverse Stage B: Stage A markers still visible. A new die chip can be seen to the right of the
initial three die chips on the shield north of the PLU in PLURIBUS.
Submitted By:
Stage A: James D. Wright, Stage
B: Christopher A. Hurley
Cross References: None known
Comments: The original WDDO-005
was found to be an earlier die stage of this die, and has been added to this
listing as Stage A.
Stage A:
Stage B:
2021 1¢ WDDO-004 Description: Moderate extra
thickness shows on the dated and on LIBERTY.
Notching shows on the upper left corners of the ERTY in LIBERTY. Die Markers: Obverse: A small die chip can be found on the lower Y
in LIBERTY. Reverse: A die crack with small die chips runs through
the top left of the shield north of the PLU in PLURIBUS.
Submitted By: Jim Wilkins
Cross
References: None
known
2021 1¢ WDDO-005 - LISTING NEEDED Comments: This listing has
been removed, as it was found to be an earlier die stage of WDDO-003, and has
been added to that listing.
2021 1¢ WDDO-006
Description: Moderate extra
thickness shows on LIBERTY. Notching
shows on the lower left corners of the ERTY in LIBERTY. The upper right of the Y is significantly
thicker than the upper left. Die Markers: Obverse: Small die gouges can be found inside the
lower D in GOD. Reverse: None significant. Submitted By: Phillip Bonner Cross References: None known
2021 1¢ WDDO-007
Description: Moderate extra
thickness shows on the date and light extra thickness shows on LIBERTY Die Markers: Obverse: A small die gouge can be found south of the
second 2 in the date. Reverse: None significant. Submitted By: Jay Painter Cross
References: None
known
2021 1¢ WDDO-008
Description: Moderate extra
thickness shows on LIBERTY. The upper
left of the Y in LIBERTY is considerably thicker than the upper right of the Y in LIBERTY.
Die Markers: Obverse: A small die gouge (dot) can be found below
and between the R and U in TRUST. Reverse: None
significant.
Submitted By: Leslie Trent
Hatchell
Cross References: None known
2021 1¢ WDDO-009
Description: Strong extra
thickness shows on LIBERTY. The upper
left of the Y in LIBERTY is considerably thicker than the upper right of the Y.
Die Markers: Obverse: None significant. Reverse: None
significant.
Submitted By: Axer E. Cotto
Cross References: None known
2021 1¢ WDDO-010
Description: Extra thickness
shows on LIBERTY. The upper left of the
Y in LIBERTY is considerably thicker than the upper right of the Y.
Die Markers: Obverse: A die crack runs north from the front of the
eyebrow. A small die gouge can be found
below the I of IN. Reverse: A die crack can be found on the upper left of
the shield north of the E PL in EPU.
Submitted By: Albert Neils Sr.
Cross References: Coppercoins:
2021P-1DO-003
2021 1¢ WDDO-011 Description: Strong extra
thickness shows on LIBERTY. The upper
right of the Y in LIBERTY is thicker than the upper left of the Y.
Die Markers: Obverse:
A die scratch runs WSW/ENE below the L in LIBERTY. Reverse: A die crack
can be found on the top left of the shield.
Submitted By: Wilbert
Anderson
Cross References: None known
2021 1¢ WDDO-012
Description: Extra thickness
shows on LIBERTY. The upper left of the
Y in LIBERTY is considerably thicker than the upper right of the Y.
Die Markers: Obverse: A die crack runs north from the front of the
eyebrow. Reverse: None noted.
Submitted By: Wilbert
Anderson
Cross References: None known
2021 1¢ WDDO-013
Description: Extra thickness
shows on LIBERTY. The upper left of the
Y in LIBERTY is considerably thicker than the upper right of the Y.
Die Markers: Obverse: A small die gouge can be found below the G in
GOD. Reverse: A small die chip can be found on the top left
of the shield northeast of the E in EPU.
Submitted By: Wilbert Anderson
Cross References: None known
2021 1¢ WDDO-014
Description: Extra thickness
shows on LIBERTY.
Die Markers: Obverse: A small die gouge can be found well to the
right of the second T in TRUST. Reverse: A
small die gouge can be found above the right side of the shield.
Submitted By: Wilbert
Anderson
Cross References: None known
2021 1¢ WDDO-015
Description: Extra thickness
shows on LIBERTY.
Die Markers: Obverse: A small die gouge can be found to the right
of the top of the first T in TRUST and centered between lower E in WE and T in
TRUST. Several small die gouges are
present above T in LIBERTY. A die gouge
(dot) is present above the second 2 in the date. A die gouge (dot) is present right of the
second 2 in the date. Die chips are
present behind Lincoln’s ear. Reverse: A die
chip is present on the shield above L in PLURIBUS. A die gouge (dot) is present left of C in
CENT. A die crack runs south from O in
ONE and then turns southeast. A die
crack runs WNW/ESE on the lower shield. A
die gouge is present under the second A in AMERICA.
Submitted By: Wilbert
Anderson
Cross References: None known
Comments: Additional die
markers are provided on a coin from Steve Young.
Additional example from Steve Young.
2021 1¢ WDDO-016
Description: Extra thickness
shows on LIBERTY. The upper left of the
Y in LIBERTY is thicker than the upper right of the Y.
Die Markers: Obverse: A small die gouge can be found inside the
lower E in WE. Reverse: None noted.
Submitted By: Wilbert
Anderson
Cross References: None known
Comments: This die is
extremely similar to WDDO-009 in character.
If anyone finds a copy of this die, I would like to do an in-hand
examination to ensure it is not a stage of WDDO-009.
Reverse Varieties
2021 1¢ WDDR-001 Description: Moderate extra
thickness shows on the designer’s initials LB and JFM. Die Markers: Obverse: None significant. Reverse: None
significant.
Submitted By: James Wilkins
Cross References: None known
2021 1¢ WDDR-002 Description: Moderate extra
thickness shows on the designer’s initials LB and JFM.
Die Markers: Obverse: A short die scratch can be found below the L
in LIBERTY. Reverse: A die crack runs across the top left of the
shield with two die chips north of the P in PLURIBUS.
Submitted By: Ryan Fowble
Cross References: None known
